How to Oil a Chainsaw Chain

To oil the chainsaw chain, you will need a container of bar and chain oil. Begin by making sure that the chainsaw is turned off, unplugged, and cool. Place the saw on a stable work surface like a table or workbench.

Remove any protective coverings over the guide bar tip guard to access the guide bar and chain area. Make sure to use gloves when handling your chainsaw parts as they may be sharp or hot from prior use. Slowly pour some of your chosen lubricants into the designated oil reservoir in small amounts until it begins to overflow slightly.

Wipe away any excess with an absorbent cloth before replacing any protective guards, then start up your chainsaw for further testing.

  • Prepare the chainsaw: Remove the spark plug cap, turn off the fuel valve, and lay the saw on its side or hang it from a tree branch.
  • Inspect the chain: Look for any visible damage like broken cutters, bent drive links, or excessive wear to determine if sharpening is necessary before oiling.
  • Lubricate the bar nose sprocket: Use a few drops of lightweight motor oil and rotate the drive link several times to ensure adequate lubrication.
  • Apply oil to each cutter in sequence: Slowly move around each cutter while applying oil until all have been covered with enough lubricant but not too much that will cause excessive buildup which can attract dirt and debris hindering the performance of your chain saw blade’s operation.
  • Wipe off excess oils: Using a rag, wipe away any excess oils so that you can see clearly through all areas of contact between cutters and guide bar when rotating them around their respective positions during use as well as avoiding build-up which causes clogging within these areas again hindering functionality of your equipment overall
How to Oil a Chainsaw Chain


Do You Put Oil on Chainsaw Chain?

Yes, you should put oil on your chainsaw chain when using it to cut wood or other materials. This is important because the oil helps to lubricate the chain and prevent excessive wear and tear, as well as keeping dust and dirt away from the cutting links. To apply oil to a chainsaw chain, first make sure that the saw is off and unplugged so that you don’t accidentally start it up again while applying the oil.

Then use an appropriate bar-and-chain lubricant for your particular model of saw – this can usually be found in most hardware stores or online retailers. Apply one drop of lubricant at each link along the length of the chain; this will help ensure even coverage throughout its entirety. Finally, wipe any excess lube off with a clean cloth before reopening your saw!

Where Do You Put the Lubricant on a Chainsaw?

When lubricating a chainsaw, it is important to apply the lubricant to all areas where two surfaces are in contact with each other. This includes the bar and chain, as well as any felt washers or bearings that may be present. To do this, start by removing the bar and chain from the saw body.

Once removed, you should use a brush or cloth to spread oil down the entire length of both sides of the guide bar and around its circumference. You can also add a few drops of oil directly onto each drive link on the chain itself for added protection against wear. Finally, make sure you check for any felt washers or bearings within your chainsaw and remember to apply some oil there too before reassembling your saw!

Is It Ok to Put Wd40 on Chainsaw Chain?

Using WD-40 on a chainsaw chain is generally not recommended. The lubricant’s primary purpose is to protect metal from corrosion, and it can actually attract dirt and other contaminants which could cause the chainsaw chain to wear out much faster. It’s also important to note that WD-40 isn’t designed for use in high temperature environments – such as what a running chainsaw produces – so it may not provide adequate protection against extreme heat.

Instead, look for bar and chain oil specifically designed for use with power tools like chainsaws. This type of oil provides superior lubrication while offering greater heat resistance than WD-40.

How Often Do You Oil a Chainsaw Chain?

When it comes to oiling a chainsaw chain, this should be done regularly. It is recommended that you oil the chain before and after each use. Additionally, if you are using your chainsaw for extended periods of time (more than 15 minutes at a time), then it would be best to stop every few minutes and add some fresh oil to the chain.

This will ensure the chain stays lubricated, which will help extend its life by preventing wear and tear on the metal components.

How to Lubricate Chainsaw Chains

How to Oil an Electric Chainsaw

Regularly oiling an electric chainsaw is essential for its maintenance and longevity. To do this, start by turning off the saw and disconnecting it from its power source. Then, fill the guide bar oiler with a high-quality two-stroke engine oil specifically designed for use in chainsaws, making sure not to overfill it.

Finally, switch on the saw and let it run at idle speed until you see a thin stream of oil exiting through the top of the guide bar before switching off again and reconnecting to its power supply.

How to Oil a Mini Chainsaw Chain

To properly oil a mini chainsaw chain, first make sure the saw is turned off and unplugged. Then, check the owner’s manual for specific instructions on how to oil your particular model of mini chainsaw. Generally, however, you will want to fill an oil reservoir with the recommended type of bar and chain oil before running the engine for a few minutes to ensure that all moving parts are lubricated.

Afterward, turn off the engine and use a clean cloth or rag to wipe away any excess oil from around the chain bar area.

Chainsaw Chain Oil Substitute

Chainsaw chain oil is an important part of maintaining the performance and longevity of a chainsaw. If you find yourself in need of a substitute for chainsaw chain oil, motor oils such as SAE 30 or 10W30 can be used in a pinch, though not as effectively as proper chain oil due to their higher viscosity. It’s important to note that these substitutes should not be used on saws with automatic-oiling systems since they are too thick and may cause damage.

Vegetable Oil for Chainsaw

Vegetable oil is a great option for chainsaw maintenance. Vegetable oil is easy to find and inexpensive, making it an ideal lubricant for your chainsaw bar and chain. It provides ample protection from wear and tear on the metal components of the saw, ensuring that it runs smoothly and efficiently.

Additionally, vegetable oil helps to keep dust buildup away from the mechanisms of your chainsaw which can cause jamming or stalling when cutting wood.


Overall, oiling a chainsaw chain is an important step in keeping the saw running smoothly. It only takes a few minutes and requires minimal supplies, so it’s worth doing regularly to ensure your safety and extend the life of your chainsaw. With these steps in mind, you’ll be able to confidently keep your saw operating optimally for years to come!

Leave a Comment