How to Sharpen a Chainsaw by Hand

To sharpen a chainsaw by hand, you will need an appropriate round file and file guide for the chain pitch of your saw. Begin by removing the bar cover from your chainsaw and cleaning off any debris or oil. Place the round file into the first cutter on the saw’s chain, then align it with the angle of that particular cutter.

Guide it along with a steady stroke at full length without stopping until you reach its end. Repeat this process for each individual cutter in succession. Make sure to check each one after filing to ensure they are sharpened evenly before replacing the bar cover back on your chainsaw and returning it to service!

  • Put on safety gear: Before sharpening a chainsaw by hand, it is important to put on the proper safety gear including protective eyewear, gloves, and long pants and sleeves.
  • Check the depth gauge setting: Using a flat file guide adjust the depth gauge settings of your chainsaw blade so that they are in line with the cutting edges of your teeth.
  • File each tooth at an angle: Holding the file at an angle of 30 degrees to 40 degrees from vertical, begin filing each tooth in succession from one side to another along its length until all of them have been filed evenly. Make sure you are filing both sides equally for best results.
  • Move onto the next tooth after every third stroke: After every third stroke move onto the next tooth while using even pressure throughout your filing technique; this will ensure all teeth get filed down to an equal level and help keep them balanced as well as symmetrical in shape when finished sharpening them up with a file tool or stone grinder later on if needed be done further down the road overtime again
  • Clean off sawdust buildup: Once you’ve finished sharpening your chain by hand use a brush or air blower to clean off any sawdust build-up around where you were working before moving on to finalizing steps like checking tension settings etc…
How to Sharpen a Chainsaw by Hand


How Do You Manually Sharpen a Chainsaw?

Manually sharpening a chainsaw is an important part of maintaining the saw and ensuring it runs safely and efficiently. To sharpen a chainsaw, you will need to first remove the chain from the saw. Once removed, place the chain on a flat surface such as a workbench and use either a round file or a special chainsaw-sharpening tool.

For best results, your file should be slightly larger than the gauge stamped into one of your saw’s drive links (which indicates its pitch size). Move your file along each cutter in an even motion until all cutters have been sharpened in this manner. Finally, reattach your chain to ensure proper tension before testing it out!

What is the Easiest Way to Sharpen a Chainsaw?

The easiest way to sharpen a chainsaw is to use a handheld round file. Make sure the file you are using matches the size of your chainsaw chain’s cutter teeth and filing angle, which can be found on the manufacturer’s website or in the user manual. Start by ensuring that your chainsaw bar is properly clamped in a vice, then use light pressure as you guide the round file along each tooth from inside out until all of them have been sharpened.

Always remember to keep your hand away from the rotating chain when operating your chainsaw!

Is It Hard to Sharpen a Chainsaw Blade?

Sharpening a chainsaw blade can be difficult because it requires specific tools and knowledge of how to use them. Chainsaws need to remain sharp in order for them to work effectively, so it is important that the blades are properly sharpened regularly. A common tool used when sharpening a chainsaw blade is a file or grinder, which can be used to sharpen the teeth on the chain’s cutting surface.

It’s important that you pay attention when using these tools, as they can cause serious damage if not handled carefully. Additionally, some types of chainsaws may require special filing techniques; therefore if you’re unsure about what type of technique should be used for your particular saw, it’s best to consult with an expert before attempting any kind of repair or maintenance on your own.

How Do You Sharpen a Stihl Chainsaw by Hand?

Sharpening a Stihl chainsaw by hand requires the use of a flat file and a round file. First, begin by ensuring that the chain is properly tensioned according to manufacturer specifications. Then, ensure that the chain has been removed from the saw before beginning sharpening.

To sharpen each tooth on your Stihl chainsaw, start with the flat file at an angle of sixty degrees in relation to your blade and guide it along each length of teeth. Follow up with two passes using a round file to hone down any burrs left over from using the flat file. Be sure to keep even pressure when filing as this will help you achieve an even cut across all teeth on your chainsaw’s bar.

Finally, after completing sharpening both sides of every tooth, reassemble your Stihl chainsaw and test it out!

No Nonsense Guide to Chainsaw Sharpening. How To Sharpen A Chainsaw Properly. FarmCraft101

Chainsaw Sharpening Tricks

Chainsaw sharpening is an important part of keeping your saw running at its best. There are several tricks and techniques you can use to keep your chainsaw blade sharp and help it last longer. Use a round file that’s the same diameter as the drive links on your chain to sharpen the teeth.

Make sure to keep the file at a correct angle when filing, and make sure each tooth has been filed evenly so there is no imbalance in cutting power. Additionally, using a depth gauge tool helps ensure all of the teeth have been cut down to their proper size for optimal performance.

How to Sharpen a Chainsaw With a Grinder

Sharpening a chainsaw with a grinder is not difficult, but it does require careful attention and some practice. To sharpen the chain, you will need to secure the saw in a vice or clamp and then use a round file to cut grooves along each side of each cutter. You then move on to using a grinding wheel mounted on your grinder to grind the teeth into their proper shape.

Finally, finish up by sharpening the depth gauges with either an angle gauge or flat file so that they are set at the recommended height for your particular chainsaw model.

Chainsaw Sharpening Mistakes

One of the most common mistakes made when sharpening a chainsaw is not keeping the chain taut. This can lead to an uneven cutting edge, which will decrease the overall efficiency of your chainsaw and make it more difficult to cut through wood. Additionally, using incorrect filing angles or too much pressure while sharpening can also cause damage to your chain or affect its performance.

To ensure that you get optimal results from your chainsaw, always use the correct technique and follow manufacturer instructions for proper maintenance and sharpening.

Chainsaw Sharpener

A chainsaw sharpener is an essential tool for any chainsaw user. It helps keep your saw in top condition, ensuring that it runs smoothly and efficiently. Using a chain sharpener regularly can ensure that the chain does not become dull too quickly, extending the life of your saw and saving you money on replacement parts.

A quality sharpener should have adjustable settings to accommodate different types of chains and will provide a consistent cutting edge each time it’s used.


Overall, sharpening a chainsaw by hand can be done with relative ease as long as the right tools are used and safety precautions are taken. With practice, you will become more proficient in sharpening your own chainsaw and save both time and money in the process. So don’t be intimidated by this task – just follow these steps to ensure an efficient, safe job every time!

Leave a Comment