How to Sharpen a Chainsaw Blade With a Electric Sharpener

To sharpen a chainsaw blade with an electric sharpener, first assemble the electric sharpener and attach it to your workbench. Ensure that you are wearing safety glasses and gloves when working with power tools. Then adjust the angle guide on the electric sharpener so that it matches the angle of your chainsaw’s cutting teeth.

Place the blades onto the grinding wheel of the electric sharpener, being careful not to move them while they are in contact with its surface. Move each blade back and forth against the grinding wheel for about five seconds or until all of its teeth have been sharpened.

After removing your blades from the grinder, use a file or stone to hand-sharpen any burrs created by using an electric grinder.

Finally, lubricate your chain saw’s bar and check that all nuts and bolts are secured before making a cut again with it.

  • Put on protective gloves and goggles before beginning to sharpen the chainsaw blade
  • Make sure the chainsaw is unplugged from any power source before attempting to sharpen it
  • Place the sharpener against a flat surface and plug it into an electrical outlet
  • Turn on the electric sharpener, adjust its speed setting according to your needs, then start rotating the chainsaw blade slowly in front of it as if you were cutting wood with it, making sure that each teeth contacts with sharpening wheel several times while doing so (you may need to do multiple passes)
  • Move the saw once all of its teeth have been ground by one side of the wheel then position them in front of other half of wheel and continue grinding until all sides are equal in size and shape
  • Once finished, remove any burrs or filings created during process using a file or sandpaper until they are sharp enough for use again without getting stuck when cutting woods or branches off trees (you can also check their condition visually)
  • Finally, turn off electric grinder after completing task; disconnect from power source and store safely away for later use!

How to Sharpen a Chainsaw Chain With an Electric Chainsaw Sharpener?

If you’ve ever tried to sharpen a chainsaw chain with a manual file, you know it can be time-consuming and difficult. Fortunately, there is an easier way – using an electric chainsaw sharpener. This tool makes the job quick and easy, so let’s take a closer look at how to use one.

First off, you need to make sure that your electric sharpener is suitable for the type of saw chain that you have. Some models are designed specifically for certain types of saws, while others may work with multiple brands or sizes of chain. Once you’ve confirmed that your electric sharpener will work with your chain, it’s time to get started!

Begin by clamping the electric sharpener onto a stable surface such as a table or bench-top near where your chainsaw will be used. Make sure it is tightly secured before proceeding any further as this will help ensure accuracy when working on the chain. You should also wear safety glasses and gloves during this process in order to protect yourself from flying debris and sparks created by grinding metal against metal.

What Angle Do You Sharpen a Chainsaw Chain With an Electric Sharpener?

A sharp and well-maintained chainsaw chain is an essential tool for any woodworker or landscaper. Keeping your chainsaw chain in good condition not only ensures that it performs better, but also keeps you safe from injury while using the saw.

Unfortunately, most of us don’t have the time to manually sharpen our chainsaw chains with a file every few weeks, which makes electric sharpeners an ideal solution for quickly and easily maintaining your saw’s cutting power.

However, when using an electric sharpener to sharpen your chainsaw chain there are a few key points to consider in order to do it correctly. The first thing you should know is that each type of electric sharpener has its own specific parameters regarding angle and speed settings.

The exact settings may vary depending on the make and model of sharpener you are using; however, generally speaking they will require setting between 10° – 20° bevel angles as this helps maintain balance while allowing more efficient cutting results.

What Angle Do You Sharpen a Chainsaw to Pull It?

If you’re looking to sharpen a chainsaw, it’s important to get the angle right. An incorrect angle can not only make the saw ineffective, but it could also cause damage and be dangerous. Here we will discuss what angle should be used when sharpening a chainsaw.

When sharpening your chainsaw, there are two angles that need to be taken into consideration – the top plate angle and side plate angle. The top plate is the flat surface of the saw blade with teeth which is on top of your saw while cutting; this should have an included angle of between 25-35 degrees (measured from each corner).

The side plate is located beneath the bottom part of your chain and faces outwards towards you when cutting; this should have an included angle between 10-20 degrees (measured from each corner).

The best way to ensure both angles are correct is by using a specialized filing guide tool which fits snugly onto your saw bar and helps maintain uniformity across all teeth as well as ensuring proper depth for optimal performance.

How Do You Use a Harbor Freight Chainsaw Sharpener?

If you need to sharpen your chainsaw, a Harbor Freight chainsaw sharpener is an easy and affordable way to do so. Using the sharpener correctly will ensure that your saw stays in good working condition for years to come. Here’s how to use a Harbor Freight chainsaw sharpener:

1. Start by preparing the area where you’ll be using the sharpener. Make sure it’s free of debris and any flammable materials are well away from the site.

2. Once everything is set up, attach the Harbor Freight chainsaw sharpener securely onto a flat surface such as a workbench or table with clamps or bolts depending on its size and weight requirements.

This will keep it stable while you’re using it – essential for safety reasons!

3. Place your dull chain into its guide slot, ensuring that all links are lined up straight before turning on the power switch located on top of the unit itself or at one end of its power cord if applicable (check your model manual). The spinning wheel should move around freely without any obstruction when properly connected and ready for use.

How to Sharpen Chainsaw Chain – Ozito Tool Tips [PXCCSSS-018]

How to Sharpen Chainsaw Chain With Oregon Electric Sharpener

It is important to keep your chainsaw chain sharpened in order to ensure the safety and efficiency of your cutting job. With the Oregon Electric Sharpener, you can sharpen a chainsaw chain quickly and easily with minimal effort. Here we will discuss how to use this tool effectively so that you can get the most out of it:

Step 1: Before beginning any work on your chainsaw, make sure that it is powered off. Once this has been done, secure the Oregon Electric Sharpener onto a sturdy surface or workbench using either bolts or clamps depending on what type of surface is available.

Step 2: Take note of the direction each blade runs before placing them into the sharpener’s slots (the arrow should point away from you).

Then place one blade at a time into its respective slot ensuring that each tooth fits snugly within its assigned spot for best results. Secure each blade by tightening down both screws on either side until they are firmly in place.


If you’re looking for a quick and easy way to sharpen your chainsaw blade, an electric sharpener is the way to go. With just a few simple steps, you can get your chain back in top condition and keep it running smoothly. First, make sure that the saw blade is clean and free of debris before using the sharpener.

Then adjust the angle guide on the machine so that it matches up with the angle of your saw teeth. Next, place one tooth of the chain into each groove of the grinder wheel and turn it on. Finally, move each tooth through both sides of the wheel until they’re all sharpened evenly.

By following this process regularly, you’ll be able to maintain peak performance from your chainsaw blade!

Leave a Comment