How to Replace a Chainsaw Chain

1. Begin by removing the chainsaw’s bar cover, which is usually held in place with two screws.

2. Unscrew and remove the old chain from the guide bar.

3. Check that your replacement chain matches the size of your original one; if not, then you will need to purchase a new guide bar as well as a chain to fit its size specifications.

4. Feed the new chain onto the sprocket or drive wheel located at the front end of your chainsaw’s guide bar. Make sure it fits snugly around both ends of this wheel before continuing with the installation procedure.

5. Fit each link into each other and press them together until they match up properly to form a continuous loop.

6. Place this newly formed loop onto your saw’s guide rail and make sure it aligns correctly along its length.

7. Securely tighten down all nuts or screws attaching your new chain to ensure that it does not slip off during operation.

8. Reattach any covers that were removed during the installation process such as those covering spark plug or air filter openings and replace any worn-out parts if necessary before starting up again!

  • Step 1: Purchase the right chain for your chainsaw. Make sure you buy a chain that is designed to fit the bar size and drive links of your chainsaw since different saws require different types of chains
  • Step 2: Unplug the power cord from your saw or remove its battery if it’s cordless. Make sure you don’t accidentally pull on the starter rope while working on the saw.
  • Step 3: Manually rotate the sprocket nose and guide bar until they are in their lowest position so that you can easily access them. Then use a wrench to loosen and remove both nuts from either side of the blade guard plate, which holds it in place over the top of blade/chain assembly
  • Step 4: Remove the old chain by manually rotating each link around itself until all pins are loose enough to be pulled out with pliers; this should allow you to separate adjacent parts into individual pieces one at a time (as if unzipping the zipper).
  • Step 5: Place new chain onto guide bar with teeth facing down towards ground and line up first few pairs of links so they match original configuration before continuing rest way around the circumference until all loops/links secured tightly together again – making sure not to leave any slack space between them as this can cause damage during operation!
  • Step 6: Securely tighten the nuts back onto the blade guard plate using the wrench once more, then plug the power source back into an outlet or return the battery pack before starting the engine again – now ready to work safely!
How to Replace a Chainsaw Chain


How Do You Put a Chain on a Chainsaw?

Putting a chain on a chainsaw is an important task that should always be done with safety in mind. Before beginning the process, make sure you have all the necessary tools such as gloves, protective eyewear, and ear protection. To begin, lay the saw down so that its guide bar is facing up.

Then use a wrench to loosen and remove the side cover plate from your saw’s clutch area so you can access the drive sprocket and chain tensioner. Next, insert the looped end of your new chain into one side of the drive sprocket before pulling it over top of it until it reaches another side. Once this is complete, use your wrench to adjust or replace any worn parts such as screws or nuts at this point if needed.

Finally, reinstall your side plate and tighten it securely with your wrench before testing out your chainsaw for proper operation!

How Do I Choose a Replacement Chainsaw Chain?

When choosing a replacement chainsaw chain, the most important factors to consider are size and type. The first step is to determine the length of your existing bar by measuring from one tip to the other with a ruler or tape measure. You should also identify any markings on the side of your current chain that indicate its pitch, gauge, and drive link count so you can match them when selecting a new chain.

Additionally, it’s important to select one that is compatible with your particular saw model as some chains may not fit certain models due to their design specifications. Once you have determined all these key details, you can then choose a replacement chain based on what best meets your needs in terms of cutting performance, durability, and price range.

Is It Better to Sharpen Or Replace a Chainsaw Chain?

It depends on the state of your chainsaw chain. If it is only slightly dull, sharpening will be a more affordable and time-efficient solution than replacing it. Sharpening involves manually filing down each individual cutting tooth with a round file to restore its sharpness.

This can be done by hand or with an electric grinder depending on the size of the chain and how quickly you need to sharpen it. On the other hand, if your chainsaw chain has become too worn out or damaged to sharpen successfully then replacement is likely going to be your best option. Chainsaw blades are designed for specific types of saws, so make sure that you’re purchasing one that matches up exactly with what you already have in order to ensure maximum efficiency when using your saw.

Can You Put Any Chainsaw Chain on a Chainsaw?

The answer to this question is yes and no. Yes, you can put any chainsaw chain on a chainsaw as long as it is the correct size for the bar of your saw. However, not all chains are created equal; each manufacturer has its own specific design that works with its product line, so if you want the best performance from your saw, then it’s best to stick with the same brand of chain.

Additionally, even if you find a compatible chain from another company, there may be differences in quality or safety standards between brands which could increase your risk of injury while using them.

How To Put A Chain On A Chainsaw Properly

How to Change a Chainsaw Chain | Stihl

Changing the chain on a Stihl chainsaw is relatively straightforward, but it’s important to make sure you are using the correct tools and techniques for your particular model. Start by removing any debris from around the bar and chain, then loosen the tension screw located near the front of the saw. Next, remove the drive links at either end of the chain and take off any remaining components from inside or around your saw’s guide bar.

Replace these parts with new ones in reverse order while ensuring that they are properly secured before re-tightening your tensioner screw. Finally, check to make sure all moving parts move freely after assembly before starting up your saw again.

Replacing Chainsaw Chain Craftsman

Replacing a chainsaw chain on your Craftsman saw is not difficult and can be done quickly. Make sure you have the right type of chain for your particular model, as well as the correct size. You’ll need to remove the old chain, clean out any debris from within the bar groove, and then install the new one.

Be sure that all parts are securely fastened before using your chainsaw again. With proper maintenance of your Craftsman chainsaw, it should provide you with reliable service for years to come!

Chainsaw Chain Replacement Direction

Replacing a chainsaw chain is an important task to keep your chainsaw running properly. It can be done in just a few steps, starting with the removal of the old chain and bar. Once removed, you should inspect all parts for wear or damage before installing new ones.

After installation, it’s essential to adjust the tension of the new chain and check that all nuts and bolts are tight so that it will stay secure during use. Finally, remember to lubricate your new chain regularly for maximum performance and longevity!

How to Change Chainsaw Chain Echo

Changing the chain on an Echo chainsaw is a simple and straightforward process. First, ensure that the chainsaw is off and unplugged. Locate the tensioning screw near the bottom of the saw’s guide bar; use a screwdriver to loosen it until you can remove the side plate from within which sits your current chain.

Unscrew all of its nuts, bolts, and links so you can take out the old chain before replacing it with your new one. Tighten up all components once again before checking that it runs smoothly in both directions around its full circumference. Finally, adjust the tensioning screw until your new chain fits snugly onto its guide bar for safe operation when cutting wood or other materials.


Replacing a chainsaw chain is an important maintenance task that requires proper safety precautions and the right tools. With a few simple steps, you can quickly replace your chainsaw’s old or worn-out chain with one that will make cutting easier and safer. Make sure to always wear protective gear when using a chainsaw, keep it clean and lubricated, and follow the manufacturer’s instructions for the installation of the new chain.

Following these tips will ensure you have many years of safe use from your saw.

Leave a Comment