How to Carve a Bear With a Chainsaw

1. Begin by securing a chainsaw with a sharp chain and bar that is suitable for the size of your bear sculpture.

2. Put on safety gear, such as goggles, gloves, and boots before starting to carve.

3. Sketch out the design of your carving onto the block of wood where you plan to make your bear sculpture using a pencil or marker pen and then cut around it with the chainsaw, leaving an inch or two more than what you want the finished product to look like.

4. Carve away all extra material until you reach your desired shape while keeping in mind that detailed features are best done with smaller tools such as chisels or gouges after most of roughing out has been done with a chainsaw.

5 . Sand down any rough edges left behind from cutting with the saw and smooth out any areas which need further refinement using sandpaper or other abrasive materials if necessary.

6 . Finally seal and finish off your carving either by painting it, staining it, varnishing it, etc., depending on what kind of look you’re going for.

  • Select a suitable log for the project: Choose a straight, softwood log that is at least 12 inches in diameter and 4 feet long. Avoid any logs with knots or other irregularities as they can cause problems when carving.
  • Securely attach the log to your work surface: Use clamps or ropes to securely fasten the log in place so it doesn’t move while you are working on it. Make sure that it is level and stable before beginning your project.
  • Prepare your chainsaw: Inspect the chain of your saw to make sure all teeth are sharp and properly aligned; if not, sharpen them now before proceeding further with your carving project. Fill up the fuel tank, check oil levels, tighten bolts, etc. until everything looks good for starting work on your sculpture.
  • Mark out where you want to cut: Using chalk lines or markers draw out what you want the shape of the bear will look like on all sides of the wood – this will be used as a guide when cutting into it using the saw later on so take extra care when drawing out these details accurately and precisely!
  • Start cutting away excess material: Begin by slowly removing large chunks from around where you want to carve (eg ears).
  • Then start making more detailed cuts such as outlining features like eyes and nose using more precise movements with smaller cuts along each line drawn earlier – keep checking against those marks often throughout this process so nothing gets misaligned!
  • Smooth down rough edges: Once all desired shapes have been carved out use sandpaper or an electric sander to smooth down any jagged edges left behind by chainsaw blades- this should give the finished product a nice even finish which won’t snag fabric clothes/skin when touched!
How to Carve a Bear With a Chainsaw


What Wood is Best for Chainsaw Carving?

When it comes to chainsaw carving, softwoods are generally the best choice for a number of reasons. Softwoods like pine or cedar tend to be easier to work with, as they can be cut and shaped more quickly than hardwoods. Additionally, these woods are less likely to splinter or crack during the carving process due to their softer consistency.

Additionally, the grain in softwood is usually finer than that of hardwood, making them ideal for creating intricate carvings without too much effort. While hardwoods may require more sanding and finishing after being carved, softwoods will often produce a smooth finish right away.

How Do You Preserve a Wood-Carved Bear?

Preserving a wood-carved bear is not difficult, but it does require some preparation and care. First, you should make sure to sand the carving lightly with fine grit sandpaper and then apply multiple thin layers of varnish or sealer to create a protective coating against moisture and dirt. Additionally, if the carving will be exposed to direct sunlight or extreme temperatures, an additional layer of wax can protect the wood from cracking or fading.

Finally, you should store your wood-carved bear in a climate-controlled area away from heat sources like radiators or fireplaces and out of direct sunlight whenever possible. With these steps taken, you can ensure that your beautiful wooden sculpture will last for years!

How Do You Carve With a Chainsaw?

Carving with a chainsaw is an art form that requires skill and patience. To begin carving with a chainsaw, select the right saw for the job – smaller saws are better for intricate details while larger saws can handle bigger pieces of wood. Next, make sure to wear protective gear such as goggles and ear protection before starting the project.

Start by sketching out your design on the piece of wood you intend to carve and transfer it onto the wood using carbon paper or white charcoal pencil. It’s important to be precise when marking out your design so that you don’t accidentally cut into an area where you don’t want to.

Once everything is marked properly, use steady pressure to slowly guide your chainsaw along your intended lines – do not apply too much pressure as this could cause damage to both yourself and the material being carved.

As always safety should come first when working with any power tools; so make sure to follow all instructions carefully and take regular breaks throughout your carving session!

How Do You Clean a Wood-Carved Bear?

When cleaning a wood-carved bear, the best way to do it is to start by using a soft cloth or brush and some mild soap. Gently wipe down the entire surface of the bear with a damp cloth, making sure not to get any water into any cracks or crevices in the carving. Once you have done this, take another clean, dry cloth and use it to buff out any remaining moisture on the surface of your bear.

If there are stubborn marks that remain after wiping down with soapy water, you can try using a toothbrush dipped in vinegar diluted with warm water to remove them more effectively. After completing these steps, make sure that your wooden carved bear is completely dry before storing away for future use.

Want to carve a bear? Have a stock Stihl MS 170? Beginner chainsaw carving tutorial First carving

Step-by-Step Bear Carving

Bear carving is a great way to express your creativity and make an amazing piece of art. The process starts with selecting the right type of wood for your project, followed by sketching out the design on it. Next, you will use a variety of different tools such as knives, chisels, files, and rasps to shape and create details in the bear carving.

Finally, sanding and finishing can be used to give the finished product a polished look. With patience and practice, anyone can learn how to carve beautiful bears from wood!

How to Carve a Bear Head

Carving a bear head is a great way to create an impressive sculpture. To start, you will need the right tools like chisels, gouges, and carving knives. You’ll want to sketch out your design on your wood block before getting started.

Once ready, begin by using your chisel or gouge to outline the shape of the head, then use other tools for detailing as needed. Lastly, finish off with sanding and polishing for that perfect look!

How to Carve a Bear Out of Wood

To carve a bear out of wood, you will need some basic tools such as a coping saw, chisels, and gouges. Start by sketching the design on the wood before marking it with a pencil or marker. Next, use your saw to make straight cuts for the body outline followed by curved shapes for limbs and head.

Finally, use chisels and gouges to smooth out rough edges and add texture details like fur or eyes. With patience and practice, you can create an amazing wooden bear sculpture that is sure to impress!

Chainsaw Carving for Beginners Book

Chainsaw Carving for Beginners is an ideal book for anyone looking to get into the art of chainsaw carving. It provides detailed instructions and guidance on tools, safety measures, and techniques that will help you create stunning works of art with a chainsaw. The book also contains helpful photographs and illustrations to guide you through each step.

Whether you are brand new to the craft or an experienced woodworker looking to expand your skill set, this book is sure to provide all the tips and tricks you need to start creating amazing sculptures!


In conclusion, carving a bear with a chainsaw can be an enjoyable and rewarding experience. It takes patience, safety precautions, proper technique, and the right tools to do it correctly. With preparation and some practice, you should soon be able to craft your own beautiful wooden bears with ease!

Leave a Comment