How to Make Chainsaw Mill

To make a chainsaw mill, you will need a chainsaw and an attachment such as a jig or guide rail. First, attach the jig to the saw’s bar so that it is at right angles to the chain. Then, mark out where you will be cutting on your log with some chalk.

After that, use clamps to secure the log in place, and then start up your chainsaw and begin making cuts according to your plan. Make sure you are wearing protective gear while working with power tools like this! Once finished, you should have several boards cut from one log using your homemade chainsaw mill!

  • Step 1: Gather the necessary materials. You will need a chainsaw, a guide board, two guide posts, lag bolts, washers, and nuts to attach the guide board and posts to the saw bar.
  • Step 2: Cut your lumber into four pieces that are approximately 8 inches wide by 24 inches long
  • These pieces should be cut in such a way as to provide enough space between them for attaching the other components of the mill.
  • Step 3: Attach one of your boards across the saw bar with lag bolts and washers so that it is parallel to it. This will act as your guideboard for when you run your cuts along its length
  • Step 4: Secure two more boards perpendicularly on either side of your saw bar using lag bolts, washers, and nuts so they form an “L” shape around the front edge of your chainsaw blade. These will serve as guides for keeping accurate angles during cutting operations later on in this project
  • Step 5: Drill holes through each post at their base where they meet with the saw bar and secure these using nuts/washers onto each side of both posts (4 total).
  • The screws should be tight enough that there is no wobble or movement when running cuts down either post’s length while cutting wood planks or beams later on during milling operations – but loose enough to allow some adjustment if needed due to variations in wood thicknesses you may encounter while working with different types of lumber over time during use
How to Make Chainsaw Mill


Is Chainsaw Milling Worth It?

Chainsaw milling can be a great way to save time and money when it comes to getting the lumber you need. It is much faster than traditional sawmilling, allowing you to cut multiple boards in one pass with minimal waste. Additionally, chainsaw mills are more affordable than band saws or circular saws and require less set-up time.

The downside of chainsaw milling is that it produces rougher cuts and isn’t as accurate as other types of milling methods, so if precision is important for your project then chainsaw milling might not be the best option. Ultimately, whether or not chainsaw milling is worth it depends on what kind of results you’re looking for in terms of speed and accuracy.

How Do You Make a Homemade Sawmill?

Making a homemade sawmill is relatively easy with the right tools and materials. To start, you’ll need to purchase or build your own logging trailer that can be attached to a vehicle for transportation. You will also need an engine, belt drive system, and blades.

Begin by building a base frame out of angle iron or steel tubing which will serve as your mill’s foundation. Once the frame is assembled, mount the engine onto it using bolts and brackets. Next, attach the belt drive system – consisting of pulleys and belts – to connect the motor to the blade in order for it to move up and down in response to commands from an operator panel (usually located at one end).

Lastly, install sharpened blades onto each side of the log being cut so they can cut through even thick logs with ease!

Can You Mill Lumber With a Chainsaw?

Yes, you can mill lumber with a chainsaw. This process is called chainsaw milling and it involves attaching a special attachment to the chainsaw that guides the blade as you cut into logs or beams. The attachment works like a jig, helping keep your cuts even and consistent while also holding the log or beam in place for easier cutting.

Chainsaw mills are excellent for customizing large pieces of wood quickly and accurately, giving them more control over their projects than using traditional tools such as saws and planers. When done correctly, chainsaw milling can produce high-quality lumber without too much effort on the part of the user.

What Kind of Chainsaw Do I Need for a Chainsaw Mill?

A chainsaw mill is a tool that uses the power of a chainsaw to cut boards from logs. To make the most effective use of your chainsaw mill, you will need a powerful and reliable saw to handle the job. Look for a model with at least a 20cc or higher displacement engine, as well as an adjustable bar length between 18-24 inches.

Additionally, you should consider investing in an anti-vibration system and safety features such as chain brakes and kickback guards to ensure safe operation during use.

How to Build a Chainsaw Mill from Scratch

Ladder Homemade Chainsaw Mill

A ladder homemade chainsaw mill is an economical and easy way to turn logs into lumber. By attaching a chainsaw to the ladder, you can quickly and easily saw through logs of any size in a safe and controlled manner. This is an ideal solution for small-scale woodworking projects or anyone looking to save money on lumber costs while still getting great results.

Homemade Chainsaw Mill Plans

Homemade chainsaw mill plans are a great way to get started in sawmilling. With the right materials, tools, and knowledge, you can build your own chainsaw mill and save money compared to purchasing a commercial unit. DIY plans usually include detailed instructions on how to construct your machine as well as helpful tips for troubleshooting common problems along the way.

Additionally, these plans often provide advice on which materials will work best for building the various components of your homemade mill.

Granberg Chainsaw Mill

The Granberg Chainsaw Mill is a versatile piece of equipment that allows users to turn fallen trees into usable lumber. It attaches easily to almost any chainsaw and features adjustable cutting depths, allowing it to cut planks of any size or thickness.

The mill also comes with an angle guide that can be used to ensure accurate cuts every time, making it perfect for both hobbyists and professionals alike looking for a reliable way to take advantage of their local timber resources.

Homemade Chainsaw Mill Guide Rails

Building your own chainsaw mill is a great way to create unique and custom lumber for projects like furniture or cabinetry. One of the most important components of building a chainsaw mill is the guide rails, which help ensure that the saw blade travels along a straight line when cutting. Homemade guide rails must be made from strong materials such as aluminum or steel, and they should be long enough so that they can attach securely to both sides of your project material.

Additionally, it’s important to make sure that each rail is level so as not to cause uneven cuts in your material. With careful planning and construction, homemade guide rails can provide reliable support for any size project you might tackle!


Making your own chainsaw mill is a great way to reap the benefits of woodworking without having to spend too much money. With the right tools and materials, you can build a durable and effective chainsaw mill that will help you create beautiful pieces of furniture or other projects with precision. By following the steps outlined in this blog post, you can make your very own chain sawmill and start taking advantage of all the benefits it has to offer.

With patience, dedication, and practice, soon enough you’ll be an expert at using your new homemade chainsaw mill for all sorts of DIY projects!

Leave a Comment