1. Make sure to use the proper safety gear before cutting logs with a chainsaw, such as protective glasses, gloves, and ear protection. 2. Place the log in an open area where you can easily move around it while sawing without anything obstructing your movement. 3. Secure it by using wedges or chocks to prevent … Read more
To start a Stihl MS 250 chainsaw, first make sure the saw is on an even, flat surface. Then check that the chain brake is engaged by pressing down firmly on the front handle. Place your right foot against the rear handle and grip it with your right hand while pulling out the starter cord … Read more
1. Start by ensuring that the engine is off and disconnecting the spark plug wire. 2. Remove any external parts, such as covers and guards, to access the clutch mechanism. 3. Unscrew the nuts or bolts holding the clutch cover in place with a socket wrench or screwdriver, depending on your saw model’s design. 4. … Read more
To remove a link from your Stihl chainsaw chain, you’ll need an appropriate size drive link and some pliers. First, locate the damaged or worn out drive link that needs to be replaced. Then, use the pliers to twist off the old drive link. After it is removed, slide in the new drive link onto … Read more
To test a chainsaw coil, start by turning off the engine and disconnecting the spark plug wire from the spark plug. Then remove any debris from around the ignition module or flywheel area with a brush. Next, make sure that all of the wiring is secure and properly connected to their respective terminals on both … Read more
To start a stubborn chainsaw, begin by making sure that the chain brake is engaged and fuel tank is full of clean, fresh fuel. Make sure all air vents are clear of debris and the spark plug wire is connected securely to the spark plug. Pull out the choke lever for cold starts or push … Read more
To start a Stihl chainsaw when flooded, first turn off the choke and engage the chain brake. Then press the prime bulb 2-3 times until you see fuel in it. Remove the spark plug and check for moisture or debris buildup. If present, clean with a small brush or compressed air. Reinstall the spark plug, … Read more
To sharpen a chainsaw blade by hand, start by securing the saw in a vice and using a file guide to ensure an even angle while filing. Using round files that are specifically designed for sharpening chainsaws, begin filing at one corner of the tooth, then work your way around until all teeth have been … Read more
1. Start by cutting away any significant roots that are above ground level and connected to the stump, using a spade or an ax. 2. Mark a line around the circumference of the tree trunk at approximately three inches above the soil surface. This will be your cutting line when you use the chainsaw to … Read more
1. Start by deciding which way you want the tree to fall. Place a wedge in the direction of the desired falling path, and make sure that it is firmly wedged into place before moving on. 2. Make a score line about one-third of the way through the trunk with an axe or saw. The … Read more
