Matthew Jackson

To tighten the chain on a Stihl chainsaw, you must loosen the bar nuts and adjust the tensioning screw. Start by loosening both of the bar nuts with a wrench while holding onto the clutch cover. Then, turn the tensioning screw clockwise until it stops. Place your thumb over the chain drive link and pull … Read more

To oil the chainsaw chain, you will need a container of bar and chain oil. Begin by making sure that the chainsaw is turned off, unplugged, and cool. Place the saw on a stable work surface like a table or workbench. Remove any protective coverings over the guide bar tip guard to access the guide … Read more

Mixing chainsaw gas is a simple process. Firstly, you need to gather the necessary materials which include two-stroke oil, unleaded gasoline, and a clean container for mixing. Start by adding the correct amount of two-stroke oil into the container according to your chainsaw’s specifications. Then add fresh unleaded gasoline up to the required level as … Read more

Chainsaw kickback is a dangerous and potentially fatal event for operators. To prevent chainsaw kickback, make sure the chainsaw is well-maintained and in good working order. Also, check that the chain tension is correct before use – too tight or too loose can cause kickback. When cutting, always hold the chainsaw firmly with both hands … Read more

To clean the Stihl chainsaw air filter, you will need to start by removing it from the saw. Unscrew and remove the screws holding it in place. Then take it outside and tap out any dirt or debris that may be inside of it. Next, use a vacuum cleaner with an upholstery attachment to clean … Read more

To make a chainsaw mill, you will need a chainsaw and an attachment such as a jig or guide rail. First, attach the jig to the saw’s bar so that it is at right angles to the chain. Then, mark out where you will be cutting on your log with some chalk. After that, use … Read more

1. Begin by selecting the right type of chainsaw chain for the job at hand. Consider factors such as saw size, cutting speed, and safety features when making this decision. 2. Once you have chosen a suitable chain, use an appropriate cutter tool to cut off any broken or worn links from the existing chainsaw … Read more

Craftsman and Husky are two top-rated brands in the tool industry, but Craftsman is generally more affordable and widely available, while Husky tools tend to be of higher quality and durability. If you’re trying to decide between the two, it really depends on what your needs are and how often you plan to use the … Read more

To start a Makita chainsaw, begin by ensuring the chain brake is engaged. Next, make sure the choke lever is in the closed position and that there are no obstructions in or around the saw. Then, place the fuel tank cap firmly onto the tank to prevent any gas leakage. After that, press down on … Read more