How to Unlock Dewalt Miter Saw

To unlock your Dewalt miter saw, first make sure that the blade is completely stopped. Then, release the blade guard by pressing the lever on the side of the saw. Next, use a wrench to loosen the bolt that secures the blade in place.

Finally, remove the blade and replace it with a new one.

  • Locate the bevel lock lever on the back of the saw near the handle
  • Use a flathead screwdriver to depress the locking tab on the bevel lock lever
  • While holding down the locking tab, slide the bevel lock lever to the left to unlock it
  • You can now adjust the bevel angle of your saw blade by turning the bevel adjustment knob located on top of the saw near the front
How to Unlock Dewalt Miter Saw


How Do You Release a Miter Saw Lock?

When you want to release a miter saw lock, there are a few things that you need to do. First, you need to make sure that the saw is unplugged. Next, locate the lock on the saw.

The location of the lock will vary depending on the model of saw that you have. Once you have found the lock, use a screwdriver or other tool to turn it counterclockwise until it is released.

How Do I Unlock My Dewalt Dws779?

If you need to unlock your Dewalt DWS779, there are a few different ways that you can do so. First, you can try using the override key that came with your saw. This key is inserted into a small hole on the side of the saw and allows you to manually release the blade lock.

If you don’t have an override key, or if this method doesn’t work for you, there are a few other things that you can try.One way to unlock your Dewalt DWS779 is by disconnecting the battery. This will disable the saw and allow you to release the blade lock.

Once the battery is reconnected, the saw will be operational again. Another way to unlock your saw is by pressing and holding down the trigger while simultaneously pushing in on the blade lock button. This can take some finagling, but eventually, it should release the blade lock and allow you to use your saw again.

If none of these methods work for you, then it’s possible that there is something wrong with your Dewalt DWS779 and it will need to be serviced by a professional.

How Do You Lock down a Dewalt Miter Saw?

Dewalt miter saws are designed for making precise cuts at a variety of angles. When you’re ready to make a cut, you first need to select the appropriate blade for the material you’re cutting. Then, you need to set the miter saw to the desired angle using the adjustment knob.

Once the blade is in position, you can lock it down using the locking lever. Finally, you can start cutting by depressing the trigger and guiding the blade through the material.

How Do You Unlock a Dewalt Miter Saw Dws774?

If you need to unlock your Dewalt miter saw dws774, there are a few things you can try. First, check to see if the saw is plugged into an outlet. If it is, unplug it and then plug it back in.

This may reset the saw and allow you to use it again. If this does not work, you may need to open up the saw and manually reset the blade. To do this, first make sure that the power is turned off.

Then, remove the blade guard and loosen the nut that holds the blade in place. Once the blade is loose, you can move it by hand to reset its position. Finally, reattach the blade guard and tighten the nut before turning on the power again.

How to Unlock Dewalt Miter Saw Dw715

If you own a Dewalt miter saw, you may eventually need to unlock it. This can be done for a variety of reasons, such as if you need to change the blade or if the saw is jammed. No matter the reason, unlocking your Dewalt miter saw is a relatively easy process.

First, start by unplugging the power cord from the outlet. Next, locate the locking lever on the back of the saw near where the power cord enters the housing. The locking lever will likely have a red padlock icon next to it.

To unlock the saw, simply rotate the locking lever counterclockwise until it clicks into place. You should now be able to open up the throat of the saw and access whatever you need to inside.Once you’re finished, remember to relock the Dewalt miter saw by rotating the locking lever clockwise until it’s snug against housing again.

Doing so will help ensure that your saw stays in good working order and doesn’t accidentally come on while you’re performing maintenance on it.


If you own a Dewalt miter saw, you may be wondering how to unlock it. Luckily, the process is actually quite simple. All you need is a Phillips head screwdriver and a few minutes of time.

With just a few steps, you’ll be able to get your miter saw unlocked and ready to use.

Leave a Comment