How to Install Blade on Dewalt 20V Circular Saw

To install the blade on a Dewalt 20V Circular Saw, you will need an appropriate-size wrench and the new saw blade. First, unplug the saw to ensure it’s safe to work with. Next, locate the arbor nut which is located near the center of the base plate.

Now use your wrench to loosen and remove this nut while holding onto both ends of the blade. Once removed, place your new blade over the arbor shaft making sure that it lines up correctly before tightening down using your wrench.

Repeat this step for each side until secure then check that there’s no wobble in your newly installed blades rotation by rotating it manually before plugging back in and trying out your new saw!

  • Step 1: Make sure to read all safety precautions before beginning the installation process. Ensure your Dewalt 20V circular saw is unplugged and powered off.
  • Step 2: Place the new blade onto the arbor of the saw. Align it so that it fits snugly into place, ensuring that none of the blades are twisted or bent out of shape in any way.
  • Step 3: Once you have successfully installed your new blade, tighten down on each screw with an adjustable wrench until they are all secure and tight in their respective positions. Be careful not to over-tighten as this can damage both the blade and the saw itself.
  • Step 4: After you have finished tightening down all screws, plug in your Dewalt 20V Circular Saw and turn it on for a test run to make sure everything is working properly before using it for its intended purpose.

Install Dewalt Circular Saw Blade Dwe575

Installing a Dewalt Circular Saw Blade Dwe575 is easy and straightforward. To install the blade, first use an Allen key to loosen the screw on the circular saw arbor collar. Then place your new blade onto the arbor, ensuring that it is securely in place before tightening the arbor screw back up.

Finally, check to make sure that your blade is adequately secured by giving it a gentle tug with your hand. Once installed correctly, you will be ready to start using this powerful and reliable Dewalt circular saw blade!

How to Install Blade on Dewalt 20V Circular Saw


How Do You Change a Blade on a Dewalt Circ Saw?

Changing a blade on a Dewalt Circ saw is fairly straightforward. Start by turning off the machine and unplugging it from its power source. Place the saw on a flat, stable surface and loosen the spindle lock lever located at the top of the tool.

This will allow you to remove the outer guard and then activate the arbor nut located in front of you to release the tension on the blade. Once this is done, use a hex wrench or an adjustable spanner to unscrew and withdraw both blades from their respective slots in order for them to be removed completely.

Finally, insert your new blades into their respective slots, secure them with your spanner or hex wrench, and reattach any guards that were removed during the disassembly process before finally plugging back your machine into its power source for testing purposes.

How Do You Install a Dewalt Saw Blade?

Installing a new saw blade on your Dewalt tool is quite simple. Begin by disconnecting the power source from your saw to make sure it is safe to work with. Next, use an Allen wrench or screwdriver to loosen and remove the nut that holds the blade in place.

Carefully remove the old blade and replace it with the new one – make sure both sides of the blade are facing outward toward you when installing. Finally, secure it by tightening down the same nut that was used to hold it in place before, being careful not to over-tighten it as this can cause damage. Once complete, reconnect your power source and test out your newly installed saw blade!

How Do You Put a Blade on a Dewalt Circular Saw Dcs571?

Putting a blade on a Dewalt circular saw dcs571 is easy and straightforward. Begin by removing the battery from the tool. Then, locate the spindle lock button located on the left side of your saw near where you insert your blade.

Push this button in, allowing you to spin off or loosen the arbor nut that secures your current blade onto the arbor shaft. Now take off your old blade and replace it with a new one (make sure it has correctly sized teeth for what material you’ll be cutting). Line up the holes in both sides of your new saw blade with those on either end of its arbor shaft, then slip them together before tightening down securely using an appropriate wrench or socket driver.

Finally, release your spindle lock button and press firmly until it clicks back into place before replacing any safety guards over top of your now-installed sawblade and reattaching your battery!

Which Way Do the Teeth Go on a Circular Saw Blade?

When it comes to installing a circular saw blade, the direction of the teeth is important. The proper way for the teeth to go on a circular saw blade is with them pointing away from you and towards the front of the saw. This orientation will ensure that any material you cut will be pushed away from you as opposed to being pulled back towards you, which can cause kickback or other safety hazards.

Additionally, when cutting with a circular saw blade, make sure that all of your fingers are well clear of the blade’s path so as not to get injured by them spinning at high speed.

DeWalt Circular Saw Blade Change (English). See Description for Spanish Link


Installing a new blade on your Dewalt 20V Circular Saw can be easily done in just a few steps. Firstly, you should unplug the saw and remove the battery before starting the installation process. Next, loosen the arbor nut and place it aside.

Then carefully slide off the old blade and replace it with a new one that is compatible with your model of a circular saw. Finally, tighten down the arbor nut to complete the installation process. With these simple steps, you will have successfully installed a new blade onto your Dewalt 20V Circular Saw!

Leave a Comment