How to Cut Crown Molding With a Compound Miter Saw

Crown molding is a decorative element used to finish the tops of cabinets, windows, and other architectural features. It’s made from a variety of materials, including wood, plastic, and metal.To cut crown molding with a compound miter saw, start by setting the blade to the desired angle.

Next, measure and mark the piece of molding you’ll be cutting. Then, place the molding against the fence of the saw so that it’s flush with the blade. Finally, make your cut slowly and evenly.

  • Set the bevel angle of your compound miter saw to 45 degrees
  • Place the crown molding upside down and flush against the fence of the saw
  • Cut the first piece of crown molding
  • Measure and mark the second piece of crown molding
  • Cut the second piece of crown molding at a 45 degree angle, using the same technique as before
How to Cut Crown Molding With a Compound Miter Saw


What is the Angle to Cut Crown Molding?

If you’re looking to add some crown molding to your home, you might be wondering what the angle is that you need to cut it at. The answer depends on the type of crown molding you’re using. For example, if you’re using a standard 2″ x 4″ piece of lumber, the angle will be 45 degrees.

However, if you’re using a thicker piece of lumber, like a 2″ x 6″, the angle will be 38 degrees. And if you’re using a thinner piece of lumber, like a 1″ x 4″, the angle will be 52 degrees.Knowing what angle to cut your crown molding at is important because it affects how the finished product looks.

If you cut it at too shallow of an angle, the joint between the two pieces of molding will be visible and it won’t look as nice. On the other hand, if you cut it at too steep of an angle, there will be a gap between the two pieces of molding. So make sure you know what size lumber you’re using before cutting!

What is 31.6 Degree on Miter Saw?

Assuming you are referring to a miter saw blade, the answer is that it is a standard setting for many blades. It is the angle at which most cuts are made.

How Do You Cut Crown Molding for Beginners?

Crown molding is a type of decorative trim used to cover the junction between a ceiling and wall. It can be made from a variety of materials, including wood, plaster, or polyurethane. Crown molding can be challenging to install, but the results are worth it.

Here are some tips for cutting crown molding for beginners:1. Use a miter saw: A miter saw is the best tool for cutting crown molding. It can make both horizontal and vertical cuts, which is important for getting a clean fit against the wall and ceiling.

If you don’t have a miter saw, you can use a handsaw or power drill with an attachment that allows you to make angled cuts.2. Make sure your cuts are accurate: When cutting crown molding, accuracy is key. Even small mistakes can result in an uneven or sloppy finish.

Take your time and measure twice before making each cut.3. Practice on scrap pieces first: Before cutting into your actual pieces of crown molding, practice on some scrap wood first. This will help you get a feel for the material and how it behaves when cut at different angles.

How Do You Mitre Crown Molding?

Crown molding is a decorative element that is typically installed where the ceiling and wall meet. It can be made from a variety of materials, including wood, plaster, and plastic. Crown molding can be plain or ornate, and it is available in a variety of profiles to suit your design preferences.

To install crown molding, you will need to use a miter saw to make cuts at 45-degree angles. You will also need to use a coping saw to cut around any obstacles, such as electrical outlets. To attach the crown molding, you can use construction adhesive or nails.

How to Cut Crown Molding Flat with a DEWALT Miter Saw

Cutting 45 Degree Crown Molding Flat

Cutting 45 degree crown molding flat can be a bit tricky. The key is to make sure that your cuts are precise. Here are a few tips to help you get the perfect cut every time:

1. Use a miter saw – This will ensure that your cuts are nice and clean.

2. Measure twice, cut once – This old saying definitely applies when cutting crown molding. Make sure you measure the wall and the piece of molding before making any cuts.

3. Use a guide – A simple piece of wood or cardboard can help you keep your cuts straight. Just attach it to the wall and line up the molding with it before cutting. 4. Take your time – If you rush, you’re more likely to make a mistake.

So take your time and focus on each cut as you make it.


If you’re looking to add some decorative flair to your home, one way to do so is by installing crown molding. Crown molding can be tricky to install, but with a little patience and the right tools, it’s not as difficult as it may seem. One of the most important tools you’ll need for the job is a compound miter saw.

In this article, we’ll show you how to use a compound miter saw to cut crown molding so that it fits perfectly in your space.

Leave a Comment