1. Begin by ensuring the chainsaw is turned off and unplugged.
2. Use a wrench to loosen and remove the bar nuts on either side of the guide bar.
3. Carefully remove the chain from around the guide bar, noting which way it was sitting for later reference.
4. Place your new chain onto the guide bar, making sure that it is seated correctly in each groove along its length with all of its teeth pointing forward in their intended direction as per any instructions supplied with your product or specified online/in manuals etcetera).
5. Tighten up both sides of the guide-bar using your wrench until they are secure but not too tight so as to risk damaging other parts like bearings or drive sprockets etcetera).
6. Reattach any covers removed during this process carefully and make sure everything else looks ok before plugging back in again (if electric) or starting if petrol powered etcetera).
- Prepare the Chainsaw: Before you can begin replacing the chain, make sure that your chainsaw is turned off and has cooled down completely.
- Remove any debris or dirt from around the blade sprocket cover and ensure that there are no obstructions blocking access to the chain’s tensioner screws
- Loosen Chain Tension: Once you have access to both of the tensioner screws on either side of the chainsaw, loosen them by turning them counterclockwise until they are free enough for you to remove the old chain easily
- Replace Chain: Take out your new replacement saw chain and feed it through one of its drive links into an open link in your bar groove
- Make sure all of your drives fit securely before continuing with this step
- Tighten Chain Tension: When all drive links are secure, turn both tensioner screws clockwise to tighten up your new saw chain until it’s snug but not too tight against its bar groove guide rails and other moving parts in order for proper functioning of your chainsaw during use.
- Test New Chain: Finally, test out your newly replaced saw chain by starting up the engine again and giving it
Credit: www.instructables.com
How Do You Change a Chainsaw Chain?
If you’ve ever used a chainsaw, you know how important it is to keep the chain sharp and functioning properly. The chain is what does most of the work when cutting through logs and branches. But over time, your chainsaw’s chain can become dull or even damaged due to wear and tear.
When this happens, it’s time to change out the old chain for a new one. Here are some simple steps that will help guide you through replacing a worn-out or broken chainsaw chain:
1) First off, make sure your saw is turned off and unplugged before attempting any repair or maintenance on it. Then remove its spark plug wire so there’s no chance of accidental starting while working on the saw.
2) Next step is to loosen the bar nuts located at each end of the bar in order to remove them from the saw body itself. Depending on your model of chainsaw, these nuts may be held in place by either an adjustable wrench or Allen key/wrench combination tool that comes with many models from different manufacturers (check your manual).
How Do You Change a Chain on a Stihl Chainsaw?
If you’re a homeowner with a Stihl chainsaw, it’s important to know how to change the chain. The process is relatively straightforward and can be done in just a few minutes. Here’s what you need to do:
1. Safety First! Before beginning any work on your saw, make sure the power switch is off and that it’s unplugged from the electrical outlet or fuel tank if applicable. It’s also essential to wear protective gear such as gloves, goggles and ear protection when working with this type of equipment.
2. Remove the Cover: Once everything is set up for safety, remove the cover from your Stihl chainsaw by unscrewing its screws using an appropriate tool such as a screwdriver or wrench depending on what kind of fasteners are used in your particular model of saw.
Once all screws have been removed, carefully lift off the cover and set aside out of harm’s way until needed again later on during reassembly steps later in this guide.
How Do You Relink a Chainsaw Chain?
Chainsaw chains can become unlinked during use, creating a dangerous situation for the user. Knowing how to relink a chainsaw chain is an important safety skill that every chainsaw operator should know. In this post, we’ll take a look at the steps you need to take in order to safely and effectively relink your chainsaw chain.
The first step is to ensure that the saw is turned off and unplugged before attempting any repair work. Once it has been powered down, lift up the top handle of the saw so that you can see inside.
You will then need to rotate the clutch drum clockwise until it stops moving – this will allow you access to inspect or adjust any components within its housing.
Next, remove all tension from both sides of the guide bar by carefully loosening each side’s sprocket nut with an adjustable wrench or socket set. This will provide some slack in your chain so that it can be removed more easily when necessary.
How Do You Change a Chain on a Craftsman Chainsaw?
Changing a chain on a Craftsman chainsaw can be intimidating, but with the right tools and instructions you can do it yourself. This guide will walk you through the process step-by-step so that you can get back to sawing in no time!
Step 1: Check your manual – Before attempting any kind of repair or maintenance on your chainsaw, make sure to consult the owner’s manual for detailed instructions specific to your model.
Step 2: Safety first – Wear protective goggles and gloves when changing a chain on a Craftsman chainsaw. Make sure the area around where you are working is clear of debris and other objects that could interfere with or cause injury during this procedure.
Step 3: Prepare for replacement – Disconnect the spark plug wire from its connection point on the engine and lay it aside in an area where it won’t be disturbed throughout this process.
Disengage all tensioners associated with the bar/chain assembly including those located near each side of the housing cover as well as any secondary screws or latches found along its length.
How To Put A Chain On A Chainsaw Properly
Chainsaw Chain Replacement Direction
If you’re a chainsaw user, then you know how important it is to take proper care of your saw. One essential part of taking good care of your chainsaw is periodically replacing the chain. Replacing the chain can help ensure that your saw is running safely and efficiently, so it’s important to make sure that you do it correctly.
Here are some tips for replacing a chainsaw chain in the right direction:
1. Make sure that you have all the necessary tools before getting started. You will need an adjustable wrench, screwdriver, vice grip pliers, and small file or grinding stone to complete this project properly.
2. Remove any debris from around the bar before beginning work – this includes dirt, wood chips and other material which can cause issues during replacement if left on there for too long. Take extra precaution when cleaning near any moving parts as they could get damaged easily if not handled correctly!
3. Disconnect the spark plug wire from its connection point on the engine – this should be done every time maintenance or repairs are made on a chainsaw regardless of what type they may be working with!
Conclusion
Changing the chain on your chainsaw doesn’t have to be a daunting task. It’s actually quite simple once you know what you’re doing! First, locate the bar and put it in a horizontal position so that the chain is exposed.
After that, remove any tension from the saw by loosening or removing the bar nuts at either end of it. Once this is done, take off the old chain using pliers or other tools if necessary. Then measure your new chain to make sure it fits properly and thread it through both sides of the guide bar.
Finally, add tension back into your saw by tightening up those same bar nuts and then check for proper alignment before use. With these easy steps, you’ll be able to change out your chainsaw’s chain in no time!
Table of Contents