Most “best one-handed reciprocating saw” lists do the same thing: line up a few famous brands, copy the marketing bullet points, and call the heaviest-hitter “best overall.” That tells you almost nothing about the thing you actually care about, which is how the saw behaves when it is the only thing your dominant hand is holding while your other hand is bracing a pipe, a branch, or a ladder. Two saws come out on top of this comparison for true one-handed use: the DEWALT ATOMIC DCS369B and the Milwaukee M18 FUEL Hackzall 2719-20. Whether you are a pro on a demolition work crew, a plumber working under a sink, or a homeowner building a DIY toolkit, these cordless power tools were picked and ranked for how they handle in a single hand.
So this guide ranks five of the best cordless reciprocating saws a different way. Instead of brand loyalty, we compare them on five numbers that decide whether a saw is genuinely pleasant to run with one hand:
- Carry weight, because every pound is multiplied by an overhead reach.
- Overall length, because a short saw fits between studs and under sinks.
- Stroke length (the blade stroke), because a longer blade stroke clears more material per pass.
- Strokes per minute (SPM), because speed finishes the cut before your wrist tires.
- Blade-change style, because tool-free blade changes matter: a one-handed saw you can’t re-blade one-handed defeats its own purpose.
We also multiply stroke length by top SPM to get a single “stroke-inches per minute” figure. It is a spec-sheet index, not a lab result, but it is a fairer way to compare a short-stroke, fast saw against a long-stroke, slower one than looking at either number alone.
Here is the short version, then the full breakdown.
Quick Answer: Which One-Handed Reciprocating Saw Should You Buy?
| If you want… | Buy this |
|---|---|
| The lightest saw you can truly run one-handed | DEWALT ATOMIC DCS369B |
| The most cutting power in a true one-hand body | Milwaukee M18 FUEL Hackzall 2719-20 |
| The best compact saw for studs, framing and tight cuts, with room for two hands | DEWALT DCS367B |
| Maximum power, and you don’t mind weight | Makita XRJ06Z (18V X2 / 36V) |
| An overhead-friendly D-handle saw for Bosch 18V owners | Bosch CRS180B |
Our overall pick for most people is the DEWALT DCS369B, because it is the only saw here that stays comfortable after the tenth overhead cut. If you already own Milwaukee M18 batteries and want more bite, the Hackzall is the better tool.
Comparison Table: All 5 Saws at a Glance
Cordless one-handed reciprocating saws, ranked by our overall pick
| # | Saw | Battery system | Stroke | Max SPM | Length | Tool-only weight | Stroke-inches/min* | Grip style |
|---|---|---|---|---|---|---|---|---|
| 1 | DEWALT DCS369B ATOMIC20V MAX brushlessBest overall | 20V MAX | 5/8″ | 2,800 | 12.5″ | 3.13 lb | ~1,750 | True one-hand |
| 2 | Milwaukee 2719-20 M18 FUEL HackzallPOWERSTATE brushlessMost powerful one-hander | M18 | 7/8″ | 3,000 | 14″ | 4.07 lb | ~2,625 | True one-hand |
| 3 | DEWALT DCS367B Brushless Compact20V MAX XRBest all-rounder | 20V MAX | 1-1/8″ | 2,900 | 14.5″ | ~5 lb5.4 lb on some listings | ~3,263 | Pistol grip, 1 or 2 hands |
| 4 | Makita XRJ06Z X218V X2 LXT (36V) brushlessMax power | 2 × 18V LXT (36V) | 1-1/4″ | 3,000 | 17-3/4″ | 10.2 lbwith batteries | ~3,750 | Two-hand saw |
| 5 | Bosch CRS180B18V D-handleOverhead pick | Bosch 18V | 1-1/8″ | 2,700 | 17.7″ | 6.35 lbsome listings say 7.6 lb | ~3,038 | D-handle, mostly two-hand |
*Stroke length × top SPM. A comparison index from published specs, not a measured cutting-speed test. Weights exclude the battery, except the Makita, which needs two batteries to run.
What the table tells you immediately: the two saws that are genuinely one-handed (the DEWALT DCS369B and the Milwaukee Hackzall) are also the two with the shortest strokes. That is the core trade-off of the whole category, and the rest of this guide is about deciding how much of one you are willing to give up for the other.
How We Ranked These Saws
We want to be upfront about method, because that is what separates a useful buying guide from a repackaged ad.
What this ranking is based on: manufacturer specifications cross-checked against multiple dealer listings, the way each manufacturer describes the tool’s intended use, and the trade-offs those specs imply. Where listings disagree (for example, the Bosch’s weight appears as both 6.35 lb and 7.6 lb on different pages), we say so rather than pick the friendlier number.
What it is not: a hands-on lab test. We are not going to tell you a saw “cut 47 two-by-fours on one charge” when we did not run that test. Claims like “up to 50% faster cutting” or “up to 4x lower vibration” are the manufacturers’ own, and we label them as such.
One-handed means one-handed. We scored each saw on whether you can start, steer, finish and re-blade it with a single hand. A saw that is pleasant for two-handed demolition but awkward in one hand does not rank higher just because it is more powerful.
A note on the order. The first two saws are true one-handers. Saws 3 to 5 are progressively more “two-hand saws with one-hand features,” and we say clearly where each one stops being a one-handed tool. If you only ever want a saw you can run single-handed, stop reading after the Hackzall.
1. DEWALT ATOMIC DCS369B: Best Overall One-Handed Reciprocating Saw
Best for: plumbers, electricians, HVAC techs, pruning, and anyone cutting overhead or in awkward positions.
The one-line verdict: the lightest saw in this guide and the one most clearly designed around a single hand.
Key specs
| Spec | DCS369B |
|---|---|
| System | 20V MAX* (18V nominal) |
| Motor | Brushless |
| Stroke length | 5/8″ |
| Speed | 0–2,800 SPM, variable trigger |
| Length | 12.5″ |
| Weight (tool only) | 3.13 lb |
| Blade change | Tool-free blade release |
| Extras | LED work light, pivoting shoe, belt hook, 2 blades included |
| Warranty | 3-year limited |
| Battery and charger | Sold separately |
Why it earns the top spot
The headline number is 3.13 lb. DEWALT says that is about 37% lighter than its own DCS367 compact saw, and the arithmetic holds up against the DCS367’s roughly 5 lb listing. In practice, the weight difference is what you feel on the fifth cut above your shoulders, not the first.
At 12.5 inches, it is also the shortest saw in the group, so its compact saw head reaches places the others can’t: under a sink, behind a toilet flange, between a joist and a duct, or in the crook of a tree.
The tool-free blade release gives you tool-free blade changes, so there is no Allen wrench to lose on a ladder. Two other small features matter more than they sound. The pivoting shoe gives you more contact points against the work than a fixed shoe, which helps steady a saw that you are holding in one hand. And the belt hook means that when you put it down you don’t have to find a flat surface, which is a real convenience on a ladder.
What to watch for
- The 5/8″ stroke is short. At roughly 1,750 stroke-inches per minute it has the lowest index of the five. It excels at metal pipe, PVC and other plastics, conduit, trim, small framing members and branches. It is not the saw for a thick timber you want gone fast.
- Bare tool. You need a 20V MAX battery and charger. If you are already on the DEWALT 20V MAX platform, that is a non-issue; if you are not, budget for a battery.
- It is not a demolition saw. Treat it as a precision and access tool, not a replacement for a full-size Sawzall-style saw on heavy demolition work.
Who should buy it
Anyone whose work is “one hand on the workpiece, one hand on the saw,” particularly in tight or overhead spaces, and anyone who wants the lightest option without leaving a major battery platform.
Who should skip it
Demolition crews and anyone who regularly cuts thick material. Go to the Hackzall or one of the heavier saws below.
2. Milwaukee M18 FUEL Hackzall 2719-20: Most Powerful True One-Handed Saw
Best for: pros who want maximum cutting speed in a body that is still genuinely one-handed.
The one-line verdict: the most aggressive saw you can still comfortably run with one hand.
(Shoppers often search for this tool as the “Milwaukee hacksaw.” The real name is Hackzall, and it is a cordless reciprocating saw, not a hand hacksaw.)
Key specs
| Spec | 2719-20 Hackzall |
|---|---|
| System | Milwaukee M18 |
| Motor | POWERSTATE brushless |
| Stroke length | 7/8″ |
| Speed | 0–3,000 SPM |
| Length | 14″ |
| Weight (tool only) | 4.07 lb |
| Blade change | Tool-less |
| Extras | Pivoting shoe, built-in LED, REDLINK PLUS electronics, rubber seals and weep holes |
| Battery and charger | Sold separately |
Why it ranks second
Compared with the DCS369B, you give up roughly a pound of weight and 1.5 inches of length, and in return you get a 7/8″ stroke instead of 5/8″ and a 3,000 SPM top speed. By our index, that is roughly 2,625 stroke-inches per minute versus about 1,750, around half again as much blade travel.
Milwaukee’s own claim is that this saw cuts up to 50% faster than competitors and has a dual-gear counterbalance mechanism that lowers vibration up to 4x compared with traditional reciprocating saws. Treat both as manufacturer claims rather than independent results, but the underlying design logic is sound: when your wrist is the only thing absorbing the saw’s vibration rate, good vibration control is exactly the feature you want.
The REDLINK PLUS electronics protect against overload, overheating, and over-discharge, and the rubber seals and weep holes are aimed at wet, dusty job sites. That makes the Hackzall a tool for people who drop saws in dirty places for a living.
What to watch for
- It is heavier than the DCS369B. About 4 lb bare, and the weight with a battery will be higher still. Over a long overhead session you will notice it.
- Battery lock-in. It is an M18 tool. If you are on another platform, factor in the cost of switching or running two systems. On the upside, the same M18 lithium-ion batteries power a huge range of Milwaukee tools, including the Milwaukee cordless tablesaw, so the battery investment goes further.
- Bare tool. Battery and charger are not included.
Who should buy it
Plumbers, remodelers and electricians already on Milwaukee M18 who want fast cuts in tight quarters. If you cut a lot of metal pipe, conduit, threaded rod, angle iron or framing in confined spaces, this is a standout.
Who should skip it
Anyone prioritising the lowest possible weight above all else (go for the DCS369B), or anyone not on M18.
3. DEWALT DCS367B Brushless Compact: Best Compact Saw With Room for Two Hands
Best for: carpenters and remodelers who want a short, powerful saw they can use one-handed for quick cuts and two-handed for long ones.
The one-line verdict: the best all-rounder of the group, and the first saw here where you’ll want a second hand for certain jobs.
Key specs
| Spec | DCS367B |
|---|---|
| System | 20V MAX XR (18V nominal) |
| Motor | Brushless |
| Stroke length | 1-1/8″ |
| Speed | 0–2,900 SPM, variable trigger |
| Length | 14.5″ |
| Weight (tool only) | About 5 lb (5.4 lb on some listings) |
| Blade clamp | Keyless, lever-action, 4-position |
| Extras | LED work light, soft-grip handle |
| Origin | Listed as made in the USA with global materials |
| Warranty | 3-year limited |
| Battery and charger | Sold separately |
Why it ranks third
This saw has a 1-1/8″ stroke, more than double the DCS369B’s, at nearly the same top speed. That works out to roughly 3,263 stroke-inches per minute, almost double the ATOMIC’s figure. It’s meaningfully faster through wood and metal, and DEWALT says the brushless motor delivers up to 2.5x more runtime than earlier designs.
The four-position blade clamp is the other standout. You can mount the blade in four orientations, which makes flush cuts against a wall or floor far easier than on a saw with a fixed blade orientation.
At 14.5 inches long, it still slips between studs and into tight spots, which is exactly what DEWALT markets it for.
The honest caveat
DEWALT itself sells the DCS369B as its one-handed saw, and positions the DCS367B as the compact saw. At about 5 lb bare, it is workable one-handed for short cuts, but for a long cut in a stud bay or overhead you’ll naturally add your second hand. If your top priority is one-handed use, buy the DCS369B. If you want speed and a little versatility, this is the better-rounded saw.
Who should buy it
DEWALT 20V MAX users who want one saw that handles light demo, framing, pipe, and pruning without feeling underpowered.
Who should skip it
Anyone whose jobs are mostly overhead and tight, where the extra 2 lb will wear on you.
4. Makita XRJ06Z 18V X2 (36V) LXT: Maximum Power, Not a True One-Hander
Best for: people who want corded-saw performance without a cord, and who already own Makita 18V LXT batteries.
The one-line verdict: the most powerful saw here by a wide margin, and also the heaviest. Buy it for power, not for one-handed use.
A transparent note on this pick: we’re including this saw because it is on this list, and it is worth knowing about, but we’d be doing you a disservice if we pretended it belongs in the same category as the two saws above. It doesn’t. It is a full-size saw that happens to have a few one-hand-friendly features.
Key specs
| Spec | XRJ06Z |
|---|---|
| System | Two 18V LXT batteries (36V X2 LXT) |
| Motor | Brushless |
| Stroke length | 1-1/4″ |
| Speed | 0–2,300 SPM (low) / 0–3,000 SPM (high) |
| Length | 17-3/4″ |
| Weight | 10.2 lb with batteries |
| Cutting capacity | Up to 10″ wood (12″ blade), up to 5-1/8″ pipe |
| Extras | LED with pre-glow and afterglow, retractable hook, tool-less blade change |
| Included | One 6″ metal-cutting blade; batteries and charger sold separately |
| Warranty | 3-year limited |
Why it makes the list
It has the longest stroke (1-1/4″) and the highest top speed (3,000 SPM) of any saw in the guide, which pushes its index to roughly 3,750 stroke-inches per minute, about double the DCS369B and well above everything else. Makita says two 5.0Ah batteries deliver up to 155 cuts through 2×10 SPF lumber on a charge. It is a manufacturer figure, but it signals that this saw is designed to replace a corded recip saw.
The two-speed range is useful: low gear for controlled metal cuts, high gear for fast wood cuts. The refined crank mechanism is designed to reduce blade deflection and vibration. And it can run on Makita’s standard 18V LXT batteries, so there’s no new battery platform if you’re already invested.
Where it falls short for one-handed use
At 10.2 lb with batteries, this is about three times the weight of the DCS369B before you add anything to the blade. One-handed blade changes are possible, and the thumb-or-finger switch is convenient, but running this saw one-handed for more than a short cut is a workout, and overhead it’s tiring. The spec sheet also lists no orbital cutting setting, so you don’t get an orbital action for faster, more aggressive wood cuts.
Who should buy it
Remodelers, crews doing demolition work and heavy-duty trim-out who want cordless freedom and corded-class power, and who want a saw they can occasionally use one-handed on the ground.
Who should skip it
Anyone whose search for a “one-handed reciprocating saw” is serious. Buy the Hackzall or the DCS369B instead. If you want to stay on Makita, look at its Sub-Compact 18V LXT line (the XRJ07) or the one-handed XRJ08Z rather than the X2.
5. Bosch CRS180B 18V: Best D-Handle Saw for Overhead Work (Bosch 18V Users)
Best for: electricians and installers already on Bosch 18V batteries who work overhead.
The one-line verdict: a long-stroke, D-handle saw with a smart one-handed blade-change system, best treated as a “one hand to start, two hands to finish” tool.
Key specs
| Spec | CRS180B |
|---|---|
| System | Bosch 18V |
| Stroke length | 1-1/8″ |
| Speed | Two ranges: 0–2,400 SPM and 0–2,700 SPM |
| Length | 17.7″ |
| Weight (tool only) | 6.35 lb on most listings (7.6 lb on some older copy) |
| Blade change | Lock-Jaw one-handed blade change |
| Handle | D-handle with soft-grip zone |
| Included | 2 bi-metal blades |
| Battery and charger | Sold separately |
Why it makes the list
The Lock-Jaw blade holder (blade chuck) is the star: it is designed for fast, single-handed blade swaps, which is just what you want when you are up a ladder. The D-handle gives a very secure, controlled grip, and the variable-speed trigger lets you ease the saw into the material, which Bosch notes helps avoid kickback.
The 1-1/8″ stroke and two speed ranges let you match the saw to the material: the lower range for steel and thicker stock, the upper for faster wood cuts. Bosch also notes its FatPack batteries use a CoolPack design for heat management.
What to watch for
- It is heavier and longer than saws 1 to 3, at 6.35 lb and 17.7 inches, so the “one-handed” claim applies to short cuts. Bosch positions it as light enough for continuous overhead cutting; that is a “light for its class” claim, not a “light for one hand” claim.
- Listings don’t advertise a brushless motor or a work light. If those matter to you, the DEWALT and Milwaukee saws have both.
- Battery lock-in. Bosch 18V only.
- Conflicting weight data. Different retailers list 6.35 lb and 7.6 lb. Check the Amazon spec box before you buy.
Who should buy it
Bosch 18V owners who want a dependable overhead saw with fast one-handed blade changes.
Who should skip it
Anyone not on Bosch 18V who wants the best one-handed saw. The DCS369B and Hackzall are lighter and shorter.
How to Choose a One-Handed Reciprocating Saw
1. Start with your battery platform
A bare tool is cheap; batteries are where the money goes. The saws in this guide run on four different systems:
| Saw | Battery platform |
|---|---|
| DEWALT DCS369B and DCS367B | DEWALT 20V MAX |
| Milwaukee Hackzall | Milwaukee M18 |
| Makita XRJ06Z | Makita 18V LXT (two packs) |
| Bosch CRS180B | Bosch 18V |
All five of these are sold as tool-only (no battery, no charger) on the listings we reviewed. If you already own batteries on one of these platforms, buy that brand’s saw. If you don’t own any, pick the saw you want most and budget for a battery and charger on top. If you are on a different system, the same idea exists elsewhere. Ryobi’s ONE+ batteries and Worx’s PowerShare batteries each power their own cordless reciprocating saws, and Metabo HPT sells cordless reciprocating saws on its 36V MultiVolt platform. We have not ranked those here, but they are worth a look if you already own those batteries.
Note that “20V MAX” is DEWALT’s marketing figure for the maximum initial voltage with no load; the nominal voltage is 18V, which puts DEWALT’s batteries in the same class as the other 18V platforms.
2. Weigh the weight honestly
Bare-tool weight is only part of the story. Add the lithium-ion battery you will actually use (a larger-capacity pack is heavier than a compact one, often by close to a pound or more), and you have your real carry weight. Bigger packs give longer battery life, so you are trading weight for runtime; battery power per charge is always a balance against how long you can comfortably hold the saw. On a 3 lb saw, a bigger battery is a noticeable fraction of the total. On the Makita X2, it is part of why the saw reaches 10 lb.
A useful rule: if you will mostly cut overhead, shop for the lowest weight; if you will mostly cut at waist height or below, you can afford more saw.
3. Understand the stroke-versus-speed trade-off
A longer stroke moves the blade farther on each pass and clears more material, which feels faster in thick stock. A shorter stroke is gentler, more controllable and usually lighter. SPM (strokes per minute) tells you how often that happens.
That is why a short-stroke saw like the DCS369B can feel quick on small stock but slow through a thick timber, and why the long-stroke saws feel more aggressive but are heavier and harder to steer one-handed.
4. Look for brushless motors
Brushless-motor technology is more efficient, runs cooler and generally stretches battery life further. Four of the five saws here are listed as brushless; the Bosch listings we reviewed don’t specifically advertise it.
5. Check the blade-change system
For one-handed work this is not a nice-to-have. A tool-free or one-handed blade change (DEWALT’s tool-free release, Milwaukee’s tool-less clamp, the Bosch Lock-Jaw) is what lets you swap blades without setting the saw down. Whatever the maker calls it (blade chuck, blade holder or clamp), look for a design that grips the reciprocating blade firmly and, ideally, offers a blade eject so a hot, used blade drops out without you touching it.
6. Features that matter more than they seem
- Pivoting shoe: helps keep the saw steady against the work.
- LED work light: valuable in cabinets, crawlspaces and ceilings.
- Variable-speed trigger: lets you start a cut gently and avoid blade jump.
- Hook or belt hook: saves you from putting a hot saw on the ground.
- Trigger lock or lock-off switch: where a saw has one, it helps prevent accidental starts when you carry it with one hand.
- Ergonomic handles with an overmould soft grip: reduce hand fatigue and improve control when one hand takes all the vibration.
Which Blade Should You Use?
A great saw with the wrong blade performs like a poor one. As a general rule:
- Wood and pruning: coarse blades with fewer teeth per inch (TPI) cut fast and clear chips well.
- Metal and pipe: fine blades with higher TPI cut smoothly through thin steel, thin-wall angle iron, conduit, and copper.
- Plastics: for cutting plastics such as PVC and ABS, use a medium-TPI blade at a slower speed so the plastic doesn’t melt and grab the blade.
- Mixed demolition (nails in wood): bi-metal blades are the safer default because they tolerate hitting fasteners.
- Short vs. long blades: a shorter blade is stiffer and gives more control in tight spaces; a longer blade gives reach.
Do not confuse reciprocating blades with arbor blades, the round, centre-hole blades used on circular saws and table saws; they will not fit any saw in this guide. Always check that the blade shank matches your saw’s clamp (most modern recip blades use a universal shank), and replace blades as soon as they dull, because a dull blade makes any saw feel underpowered.
Best One-Handed Reciprocating Saw by Job
| Your job | Best pick | Why |
|---|---|---|
| Plumbing under sinks and in cabinets | DEWALT DCS369B | Shortest and lightest |
| Electrical conduit and stud bays | Milwaukee Hackzall | Faster cuts, still one-handed |
| Tree trimming and pruning | DEWALT DCS369B | Light enough to hold overhead |
| General remodeling and framing | DEWALT DCS367B | Longer stroke, flush-cut clamp |
| Light demolition | Makita XRJ06Z | Most power, long stroke |
| Overhead installs on Bosch 18V | Bosch CRS180B | D-handle and one-handed blade change |
Safety Tips for Running a Recip Saw One-Handed
One-handed cutting is convenient, but it removes your second hand from the safety equation, so these habits matter more than usual:
- Brace the workpiece. Clamp it or hold it firmly with your free hand away from the blade path.
- Keep the shoe against the material. A saw that is free to bounce is where most kickback begins.
- Start at low speed. Use the variable trigger to ease into the cut.
- Wear eye and hearing protection. And gloves when handling fresh-cut metal.
- Remove the battery before changing a blade unless the manufacturer’s manual says otherwise.
- Check what is behind the cut. Wires, gas lines, and pipes in walls and ceilings are the classic hidden hazards.
- Don’t force it. If the saw stalls, back off and reposition rather than leaning on it.
Frequently Asked Questions
What is the best one-handed reciprocating saw?
For most people, the DEWALT ATOMIC DCS369B is the best one-handed reciprocating saw, because at 3.13 lb and 12.5 inches, it is the lightest and shortest option here. If you want more cutting power and already use Milwaukee M18 batteries, the Hackzall 2719-20 is the stronger choice.
What is the lightest one-handed reciprocating saw in this guide?
The DEWALT DCS369B at 3.13 lb (tool only). The Milwaukee Hackzall is next at 4.07 lb.
Is a one-handed reciprocating saw powerful enough for real work?
Yes for pipe, conduit, PVC, trim, small framing members, and pruning. For thick timber or heavy demolition, a full-size reciprocating saw with a longer stroke is faster. Our “stroke-inches per minute” index shows the gap: roughly 1,750 for the DCS369B versus roughly 3,750 for the Makita XRJ06Z.
Can I use the DEWALT DCS367B with one hand?
Yes for short cuts, but at about 5 lb, it is designed as a compact saw rather than DEWALT’s dedicated one-handed model, which is the DCS369B. For long or overhead cuts, you will likely want both hands.
Do these saws come with batteries?
On the listings we reviewed, no. All five are sold as bare tools, so you need a compatible battery and charger. The DEWALT DCS369B includes a belt hook and two blades, the Bosch CRS180B includes two blades, and the Makita XRJ06Z includes one blade.
Is the Makita XRJ06Z really a one-handed saw?
Not in the same way as the DEWALT DCS369B or the Hackzall. It weighs about 10.2 lb with batteries and is built as a full-size saw with some one-hand-friendly features such as tool-less blade change. It is on this list for its power, not for one-handed ergonomics.
What does stroke length mean on a reciprocating saw?
It is the distance the blade travels forward and back on each stroke. A longer stroke removes more material per pass, while a shorter stroke is usually more controllable and often allows a lighter body.
What is the difference between “20V MAX” and 18V?
They are the same class of battery. DEWALT’s “20V MAX” refers to the maximum initial voltage measured with no load; the nominal voltage is 18V.
Are brushless reciprocating saws worth it?
In general, yes: brushless motors are more efficient, which typically means longer runtime and less heat. For a tool you will run often, it is worth paying for.
Which battery platform should I choose?
The one you already own. If you are starting from scratch, choose based on which brand’s wider tool line you want to build around, because the battery and charger are where most of the long-term cost sits.
Final Verdict
If you want a saw you can truly use with one hand, the choice comes down to two:
- Choose the DEWALT DCS369B if weight and access matter most. It is the lightest and shortest, and it is ideal for overhead, under-sink and pruning work.
- Choose the Milwaukee Hackzall 2719-20 if you want more cutting speed in a true one-handed body and you are on M18.
If your work leans toward framing and general remodeling, the DEWALT DCS367B is the best all-rounder. The Makita XRJ06Z is the power pick, though it is a full-size tool, and the Bosch CRS180B is the sensible overhead choice if you already own Bosch 18V batteries.
Whatever you choose, match the saw to your battery platform first and your task second, and you will rarely regret the purchase.
Prices, ratings, stock, and listing details change frequently. Confirm everything on the Amazon product page before you buy, and it can be worth comparing the price at Home Depot as well.
Table of Contents